Danke für den Tipp
Das scheint schon mal ein recht guter Ansatz zu sein - aber wohl auch sehr teuer - so ca. 60 € als 1,75 mm bei 500g
PS: Gibt es noch eine Alternative zu dem NinjaFlex Filament ?
http://www.fennerdrives.com/25c4272a-f5ab-404a-af98-a0ade180419c/_/3d/
Recommended Posts
dirkdirk 5
Hi,
machbar auf jeden Fall. Am besten wäre da wahrscheinlich sowas wie Ninja flex Filament in der Art.
Gruß Dirk
Link to post
Share on other sites