Jump to content

Max Temperature of the heat bed upgrade for the UM 1


zungara

Recommended Posts

Posted · Max Temperature of the heat bed upgrade for the UM 1

What is the max temperatur you are able to adjust without to destroy something?

In the spezification you can read 100°. If you want to print ABS it could be not hot enough. I try raise the temperature to 105° and it works.

I do not want to destroy something. So what are the limitations in reality and what are the reasons?

 

  • Link to post
    Share on other sites

    Posted · Max Temperature of the heat bed upgrade for the UM 1

    Here is a link to the configuration file for the version of Marlin that is for the heated bed kit:

    https://github.com/Ultimaker/Marlin/blob/Marlin_UM_HeatedBedUpgrade/Marlin/Configuration.h

    On line 176 you can clearly see the limit is 150C. I don't think it can really get that hot though without some added insulation or enclosing the print area.

    I typically print at 110C for ABS. It works well for me but it takes a long time to get from 100C to 110C.

     

  • Link to post
    Share on other sites

    Posted · Max Temperature of the heat bed upgrade for the UM 1

    Yes it worked.

    Yesterday i played around printing ABS. What kind of settings do you use for ABS? What is about the fan? I enable the fan at a high of 2,5 mm, but it was not a goog idea. The object get loose in the moment the fan starts. Whitout fan it sticks without warping but bridging works not good.

     

  • Link to post
    Share on other sites

    Posted · Max Temperature of the heat bed upgrade for the UM 1

    It will work up to any temperature you can get it with the stock supply. Which usually is around 110-120C. The 100C specification is because there are variations in beds and some beds won't go as high as others (simple manufacture variance)

    We seriously pumped up the power on one bed for a test, it got well over 300C without any real problems. But this was with a bench supply running 40V or so.

     

  • Link to post
    Share on other sites

    Posted · Max Temperature of the heat bed upgrade for the UM 1

    @Daid: Thank you for the clarification

     

  • Link to post
    Share on other sites

    Posted · Max Temperature of the heat bed upgrade for the UM 1

    For ABS you have to worry about layer adhesion. If the nozzle isn't hot enough or the fan is too strong. I usually print ABS with no fan. I have only printed maybe 20 parts with ABS so I'm not an expert. I suspect 30% fan for overhangs and bridging would be helpful but in truth I don't know. My parts have always been easy mechanical parts without much overhang. I also always print at 245C.

    I printed one part by accident with 100% fan and I did get a layer separation but only after an incredible amount of force.

    If you aren't getting good layer adhesion, raise the temp and/or lower the fan.

     

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...