Jump to content

Broken Delrin Clip UM Original


philip

Recommended Posts

Posted · Broken Delrin Clip UM Original

Hi all,

I broke the extruder Delrin Clip of my UM original.

I had a look on the web and a guy has replaced with an e-clip. I bought myseld few of them and I applied two.

I am asking if they are going to be good or they can cause malfunctions or breaking the 3D printer. What do you think or did you have had the same experience?

There should be the stl available on Youmagine, but it seems the website is down, I can't access it.

The Delrin Clip received with the 3D printer has a different and I am wondering if this shape is necessary for keeping the wooden gear in place.

I have to leave the machine working this night and I do not want to break.

IMG 5717IMG 5718IMG 5719Underextrusion caused by 2 clipsWooden Gear not alignedOne clip

Many thanks for any kind of answer!

 

  • Link to post
    Share on other sites

    Posted · Broken Delrin Clip UM Original

    Basically you just want something with little friction, to hold the hubbed bolt in place... Using a few e-clips should be just fine...

    If think its a good idea to put ad many as can fit, to make sure there is no play in the position of the bolt and gear...

  • Link to post
    Share on other sites

    Posted · Broken Delrin Clip UM Original

    An update: two replacement e-clips were causing under extrusion.

    Underextrusion caused by 2 clips

    One clip

    The thickness of these two together was more than the original Delrin Clip. I removed one and now there is no under extrusion. However is it normal that the wooden gear is not perfectly aligned with the motor gear? I also notice that after a while it went back aligned.

    Wooden Gear not aligned

    Anyway, I will print a copy...thanks IRobertl for sharing!(I just have to figure out how to convert a STEP file in an STL... :???: )

     

  • Link to post
    Share on other sites

    Posted · Broken Delrin Clip UM Original

    Alright... pretty impressive that the e-clips can cause enough resistance in that position, to cause under extrusion...:/

    In terms of the gear, I'm pretty sure the build instructions say they should be aligned... Here are the instructions:

    http://wiki.ultimaker.com/Ultimaker_rev.4_assembly:_Material_feed_mechanism

    However, I am also confident you can print the (very small) clip with them slightly mis-aligned...

    This can maybe convert the file for you:

    http://www.3dtransform.com/

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...