UltiMaker uses functional, analytical and tracking cookies. Tracking cookies enhance your experience on our website and may also collect your personal data outside of Ultimaker websites. If you agree with the use of tracking cookies, click “I agree, continue browsing”. You can withdraw your consent at any time. If you do not consent with the use of tracking cookies, click “Refuse”. You can find more information about cookies on our Privacy and Cookie Policy page.
Posted
· UM2 "Error - Stopped X or Y switch broken"
Hi newbie
I'm quite new with my Ultimaker 2 too (started printing in february). Maybe you have really a problem with the switches.
My own (little) experience: This error message is quite unspecific. With my own machine I had this message twice so far,
To my relief the real problem was (in both situations) that the feeder didn't deliver any filament to the nozzle. The filament was rasped down und couldn't be transported to the nozzle. Recently a moderator confirmed, that this error message will be removed in a new firmware version, since it was usually misleading. So have first a look to your filament and take it out (Apply the change filament procedure; maybe you need pliers to help the feeder to draw back the abraded filament. ).
Hope I could give you some help and you can solve the problem with that. If I have a problem with my machine, it's most often with the feeder !
Good luck, and succesful printing wishes Paban
Link to post
Share on other sites
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
Recommended Posts
paban 4
Hi newbie
I'm quite new with my Ultimaker 2 too (started printing in february). Maybe you have really a problem with the switches.
My own (little) experience: This error message is quite unspecific. With my own machine I had this message twice so far,
To my relief the real problem was (in both situations) that the feeder didn't deliver any filament to the nozzle. The filament was rasped down und couldn't be transported to the nozzle. Recently a moderator confirmed, that this error message will be removed in a new firmware version, since it was usually misleading. So have first a look to your filament and take it out (Apply the change filament procedure; maybe you need pliers to help the feeder to draw back the abraded filament. ).
Hope I could give you some help and you can solve the problem with that. If I have a problem with my machine, it's most often with the feeder !
Good luck, and succesful printing wishes Paban
Link to post
Share on other sites