Greets All
Necro, but pertinent.
I bought a dl3 from tenlogs amazon store a couple months ago, been slowly getting it assembled, correctly, discovering all the partially tightened fasteners, protecting 110vwires rubbing on cut extrusion, etc.
Time has come to setup the slicer, and I could not find the machine in the long list of the 4.9 cura I had installed to my HP in preparation. I found folders with instructions on the SD card that came with the machine. in there, directions to cleanly uninstall any other version of cura, taking care to manually removing the .cura folder etc. then installing the cura 4.8, that was on the SD. that worked, offline, and I find myself here, Odd first post, pretty specific, but, Hi everyone.
seeing that there tenlog in the dropdown, I also found some prominent leads to a cura profile on the TL wbsite, so, I think were gonna be ok. it runs marlin I see,
I guess now I will try to upgrade to 4.11, and keep the profile
anyway, Its just a profile, from my extensive youtube education watching, I should be able to find good starting points from the community, and create a profile for my machine that way, and do it in the latest version of the slicer software, like a normal machine.
If anyone has gotten Cura/tenlogdl3pro to play well, updated drivers firmware etc PM me, I could use a hand
I got the version with the 2209 chips fwiw