mnidannydang

I edited the post thank you for the reminder !!

Hi, i have an ultimaker 2 that has a printing head needs to be replace and thats it. Everything is still functional and new considering its print time is not much even though i had it for more than two years. Anyone knows where i can sell it since i don't use it anymore? Thank you. Edit: I am from South California , USA . Thank you for the comment lol sorry!!

Hello, i want to turn on hot end fan for ultimaker 2 but don't know how to do it because i uninstall the heater block and buy a new one, so now i can't heat up the nozzle and thus the hot end fan can't be turnt on automatically by heating up the nozzle. Is there any way i can turn this hot end fan on by gcode or something? If so how do i run the gcode in ultimaker 2. Thank you.

Hi, i just got some improvement on the Benchy printing. I have done some changes and some improvement on the cooling system as well. What i have done so far: 1. Cleaning the Z axis as you said ( i have not applied the magnalube on the main Z axis yet still waiting for order from amazon to arrive) , just simply cleaning the dirt and debris from the main Z axis and light cleaning on two Z pole. 2. I have tightened the belt, clean the feeder. 3. I have changed the print speed to 40mm/s . 4. I have reduced the retraction length from 7.0mm to 5.0mm and reduced the retraction speed to 20mm/s . 5. More importantly, i added the external desktop fan ( i am not sure but this may have solved the caramelized problem i don't see any caramelized filament anymore.) Now, the Benchy looks much better than before, less small holes (there are still 2-3 small holes) , the printing looks much smoother even though there are some light strings between the benchy hull. Overall, this print is much better than before. Thank you for your help. I am not sure if there are any thing that i could do to improve this even more.

And in the back there are some weird gap. Thank you.

Moreover, the extra line or blob or whatever it is called go arounds the benchy .. I don't know why.

Hi, i tried your recommended settings and the hole problem improved a lot but there are still some visible small hole. Moreover, i notice that on my print there are bumps like this is it because the filament is not properly cooled? I don't know.

Hi here is the STL file and i believe coasting is disabled. Thank you for your time 😄 UM2E_3DBenchy 9.3mf

And the blobs show off as well. Do you have any suggestions? Thanks.

Is this burnt filament or what is this? This keeps showing up and i am don't know why.

- So i increased travel speed to 200 mm/s. - By default i believe it is to be wall then infill last - I changed to random Z aligment and you know what? The small hole appeared matched the location where the next start point of new layer. So how should i fix this? - Should i play with jerk and acceleration control or should i just turn it off? Thanks.

Here is the speeds for this sprint. More over should i play around print jerk and print acceleration to improve my print? Thanks

Hi, i am using ultimaker 2 and trying to calibrate my ultimaker. I am using .8mm nozzle with .4 layer height but the results keep giving me this small hole in the print. What could be the possible problem here? Thank you.

Hi, i broke the wire while changing the heater cartridge. Can i just solder these two wires together? Is there any other way since i have never done soldering. Thank you.

Hi, everything was normal but when i tried to change the osson block with new nozzle and plug black in the Heat Cartridge and Heat sensor, it gave me Error 03. So will changing the heat cartridge fix this problem? Thanks.

Hi attached is the video of me trying to do flow rate calibration and seems like the hot end move like it has a hiccup for a moment. What could be the cause of the problem? Layer Height .3mm Initial layer height .8mm Line width .8mm Wall thickness 0 Wall line count 1 Top and bottom thickness 0.0 mm infill 0% Material flow 100% Print speed 30mm/s No retraction enabled Attached is the zip file of the video i took . The problem is at around 3s and last second. Thank you for your advices. video-1651830177.zip

problem solved, i have been choosing the wrong setting the whole time. My nozzle is .8mm but my setting was for .4mm nozzle.

So, i increased the temperature to 220, material flow rate to 120% and print speed to 80% and the model improved.

Hi, should i increase the filament flow when printing? I read on some posted on google and it is said to be not advisable doing so.

Having the same problem :

Hi, below is the picture and video for my problem when doing a print of the milk crate. Everything was going okay with the brim layer but the model is everywhere just like in the video. I was going slow 15ms and 210 celsius with 60 celsius bed. I have no idea why this is happening. I just did the atomic method to clean the left over from the print head. I am new to this please help me. Thank you so much for your time and guidance ! video-1650857685.zip UM2_Milk_Crate.3mf

Thank you for your reply. Lastly, is there any components needs changing once in a while?

Thank you so much for help. Moreover, do you have any links to the lubricant i could use for X , Y and Z?

Hi, I am just bought an old UM and i am newbie in 3d printing. I want to replace the fan and stepper motor for my UM 2, they seem to be old and loud when running. I tried to find online for these parts but not sure which one is compatible to the UM 2. I appreciate your time and help ! :D