Jump to content

UltiMaker Evening - Talk broadcasts


Daid

Recommended Posts

Posted · UltiMaker Evening - Talk broadcasts

There is a UltiEvening next monday, where we dutch people meet up in real life, and there will be 3 talks about different subjects. The 3 talks will be held in English and broadcasted trough Google hang-out. So everyone can follow them.

Details from Erik:

 

UltiEvening talks (some/most in Dutch) will be broadcasted on Google Hangout! Be sure to tune in, especially if you're Dutch, the talks will be of value, otherwise you'll still be able to get an idea of what's going on. We will encourage English talks, but it wasn't a requirement before, so we won't force people to do so :)

To participate in the hangout, be sure to add (and Plus) Ultimaker's google+ page and also, ensure that you can reach me through my personal google+.

+Ultimaker:

https://plus.google.com/u/1/b/105283675 ... 3942/posts

+Erik:

https://plus.google.com/u/1/107219183520752939264/posts

For bandwidth reasons we will offer one streaming method. If Google turns out to be unsatisfactory, we could switch to ustream.

Cheers,

Erik de Bruijn

Ultimaking Ltd.

There will be speakers on the following topics:

Douwe van der Veen will tell about bioprinting. He is a biotechnologist, who works on a bioprinting project together with Jelle Boomstra at Protospace. He will tell you something about a modular printhead construction that they made.

Marrit Hofmans will demonstrate 3D scanning of people using the programm reconstruct-me..

Martijn Elserman, who will tell you something about the design of a new hot-end. There has been a lot of talk about new technologies and Martijn is going to show, what he has been working on so far.

The talks start around 20:00 dutch time. So feel free to join us online!

(I've also heard something about an yet unannounced announcement, so if you want to keep on top of the Ultimaker news, be sure to tune in on time!)

  • Link to post
    Share on other sites

    Posted · UltiMaker Evening - Talk broadcasts

    I am not familiar with google hangout. Is that also a way where the stream is recorded and can be viewed afterwards. As 20:00 dutch time is 4:00 am in Australia, and though being keen to watch thats not really the time when I am able to listen.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.7 stable released
        Cura 5.7 is here and it brings a handy new workflow improvement when using Thingiverse and Cura together, as well as additional capabilities for Method series printers, and a powerful way of sharing print settings using new printer-agnostic project files! Read on to find out about all of these improvements and more. 
         
          • Like
        • 7 replies
      • S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
         
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
          • Like
        • 0 replies
    ×
    ×
    • Create New...