Cura 15.06.2 inconsistant infill issues

[Phalconheart 2]

There seems to be inconsistent results depending on what value you enter for the infill amount. I had proper results at 30% and 20%, but at 25% the infill lines were randomly spaced and nowhere close to 25%.

This is not just a display bug as I actually printed a model with these odd random infills and it actually printed with the infills as displayed in Cura.

Any ideas as to why?

[nallath 1,123]

Could you post this issue on the issue tracker of the engine? You can find it here

[Phalconheart 2]

Could you post this issue on the issue tracker of the engine? You can find it here

 

Ok. Done. (I think) My first GitHub contribution. I hope I placed it in the right place.

thanks,

[nallath 1,123]

Ok. Done. (I think) My first GitHub contribution. I hope I placed it in the right place.

thanks,

 

Yup it is