Thanks for the reply. Apparently it was a pair of the wires getting caught by the endstops. Everything has returned to normal.
I would check the belt pulleys and be sure that the set screws on all of them are tight and that the belts themselves are taut as my first step.
From the video the belt looks like its slipping. If you take the feeder back off does it home properly?
Does it only do this when the print head is moving in the Y direction?
Recommended Posts
JBEngineer 1
I would check the belt pulleys and be sure that the set screws on all of them are tight and that the belts themselves are taut as my first step.
From the video the belt looks like its slipping. If you take the feeder back off does it home properly?
Does it only do this when the print head is moving in the Y direction?
Link to post
Share on other sites