If you have access to another computer, friend/family/work, maybe you could try the card there and see if you can get it going that way? If not, ask for a replacement or bite the bullet and spend 5 bucks at your local computer store to save time.
USB printing is not officially supported since it isn't reliable enough, especially on laptops. Loss of power, automatic restarts, buffer underruns etc can all cause a print to fail randomly and ruin hours upon hours of print time. I was "against" using the SD card in the beginning as well since I always used USB on my old UMO, but now I wouldn't go back.
Recommended Posts
beezerdesign 0
Update:
As I continue to brows forums for a solution or workaround, I see that there is also no reliable way to print from Cura throug the USB cable? So without the SD card, what are my options for getting my files to the printer?
Thanks in advance for any help...
Link to post
Share on other sites