Jump to content
Ultimaker Community of 3D Printing Experts
mendells

Share Your Print Speeds/Settings

Recommended Posts

I thought it might be nice to have a thread to reference when looking for print settings for different machines and materials. It would be interesting to see how different users print settings compare. Here are my typical print settings for 90% of the parts I print.

Machine: UM2/Extended (Stock)

Material: ColorFabb PLA/PHA

Print Temp: 220C

Bed Temp: 60C

Fan Speed: 100%

Flow Rate: 100%

Print Speed: 60mm/s

Layer Height: 0.12mm

Machine: UM2/Extended (Stock)

Material: ColorFabb XT

Print Temp: 240C

Bed Temp: 70C

Fan Speed: 50%

Flow Rate: 106%

Print Speed: 50mm/s

Layer Height: 0.12mm

Machine: UM2 (With Gear Extruder + Olsson Block)

Material: ColorFabb XT

Print Temp: 240C

Bed Temp: 70C

Fan Speed: 100%

Flow Rate: 125%

Print Speed: 100mm/s

Layer Height: 0.12mm

Machine: UM2 (With Gear Extruder + Olsson Block)

Material: ColorFabb XT-CF20

Print Temp: 240C

Bed Temp: 70C

Fan Speed: 100%

Flow Rate: 125%

Print Speed: 50mm/s

Layer Height: 0.12mm

What are your typical print speeds and settings?

Edited by Guest

Share this post


Link to post
Share on other sites

Here's mine so far:

Machine: UM2 (Roberts feeder)

Material: UM Silver/Black/Bronze

Print Temp: 210C

Bed Temp: 60C

Fan Speed: 100%

Flow Rate: 100%

Print Speed: 50mm/s

Layer Height: 0.1mm

Machine: UM2 (Roberts feeder)

Material: ColorFabb XT

Print Temp: 240C

Bed Temp: 70C

Fan Speed: 100%

Flow Rate: 100%

Print Speed: 50mm/s

Layer Height: 0.1mm

Machine: UM2 (Roberts feeder)

Material: ColorFabb Bronzefill

Print Temp: 220C

Bed Temp: 60C

Fan Speed: 100%

Flow Rate: 104%

Print Speed: 50mm/s

Layer Height: 0.1mm

Machine: UM2 (Roberts feeder)

Material: NinjaFlex

Print Temp: 220C

Bed Temp: 45C

Fan Speed: 100%

Flow Rate: 100%

Print Speed: 15mm/s

Layer Height: 0.2mm

Machine: UM2 (Roberts feeder)

Material: Taulman Bridge (Nylon)

Print Temp: 245C

Bed Temp: 45C

Fan Speed: 0% (OFF)

Flow Rate: 100%

Print Speed: 50mm/s

Layer Height: 0.1mm

Edited by Guest

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Our picks

    • Ultimaker Cura | a new interface
      We're not only trying to always make Ultimaker Cura better with the usual new features and improvements we build, but we're also trying to make it more pleasant to operate. The interface was the focus for the upcoming release, from which we would already like to present you the first glance. 
        • Like
      • 130 replies
    • "Back To The Future" using Generative Design & Investment Casting
      Designing for light-weight parts is becoming more important, and I’m a firm believer in the need to produce lighter weight, less over-engineered parts for the future. This is for sustainability reasons because we need to be using less raw materials and, in things like transportation, it impacts the energy usage of the product during it’s service life.
        • Like
      • 12 replies
×

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!