Jump to content

Share Your Print Speeds/Settings


mendells

Recommended Posts

Posted (edited) · Share Your Print Speeds/Settings

I thought it might be nice to have a thread to reference when looking for print settings for different machines and materials. It would be interesting to see how different users print settings compare. Here are my typical print settings for 90% of the parts I print.

Machine: UM2/Extended (Stock)

Material: ColorFabb PLA/PHA

Print Temp: 220C

Bed Temp: 60C

Fan Speed: 100%

Flow Rate: 100%

Print Speed: 60mm/s

Layer Height: 0.12mm

Machine: UM2/Extended (Stock)

Material: ColorFabb XT

Print Temp: 240C

Bed Temp: 70C

Fan Speed: 50%

Flow Rate: 106%

Print Speed: 50mm/s

Layer Height: 0.12mm

Machine: UM2 (With Gear Extruder + Olsson Block)

Material: ColorFabb XT

Print Temp: 240C

Bed Temp: 70C

Fan Speed: 100%

Flow Rate: 125%

Print Speed: 100mm/s

Layer Height: 0.12mm

Machine: UM2 (With Gear Extruder + Olsson Block)

Material: ColorFabb XT-CF20

Print Temp: 240C

Bed Temp: 70C

Fan Speed: 100%

Flow Rate: 125%

Print Speed: 50mm/s

Layer Height: 0.12mm

What are your typical print speeds and settings?

Edited by Guest
  • Link to post
    Share on other sites

    Posted (edited) · Share Your Print Speeds/Settings

    Here's mine so far:

    Machine: UM2 (Roberts feeder)

    Material: UM Silver/Black/Bronze

    Print Temp: 210C

    Bed Temp: 60C

    Fan Speed: 100%

    Flow Rate: 100%

    Print Speed: 50mm/s

    Layer Height: 0.1mm

    Machine: UM2 (Roberts feeder)

    Material: ColorFabb XT

    Print Temp: 240C

    Bed Temp: 70C

    Fan Speed: 100%

    Flow Rate: 100%

    Print Speed: 50mm/s

    Layer Height: 0.1mm

    Machine: UM2 (Roberts feeder)

    Material: ColorFabb Bronzefill

    Print Temp: 220C

    Bed Temp: 60C

    Fan Speed: 100%

    Flow Rate: 104%

    Print Speed: 50mm/s

    Layer Height: 0.1mm

    Machine: UM2 (Roberts feeder)

    Material: NinjaFlex

    Print Temp: 220C

    Bed Temp: 45C

    Fan Speed: 100%

    Flow Rate: 100%

    Print Speed: 15mm/s

    Layer Height: 0.2mm

    Machine: UM2 (Roberts feeder)

    Material: Taulman Bridge (Nylon)

    Print Temp: 245C

    Bed Temp: 45C

    Fan Speed: 0% (OFF)

    Flow Rate: 100%

    Print Speed: 50mm/s

    Layer Height: 0.1mm

    Edited by Guest
  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...