Jump to content

UM2 + Ikea Drawer Unit = Compact Printing Station


drofnas

Recommended Posts

Posted (edited) · UM2 + Ikea Drawer Unit = Compact Printing Station

Hello,

So my wife wanted her folding desk thingy back, which I had been using hold my UM2 and all accessories/filament for it. While browsing my favorite DIY Furniture site, and came across the MICKE Drawer Unit on Casters, checked the dimensions of the top along with my UM2 and BAM, perfect fit. While doing the obstacle course known as the "IKEA Experience ", I also saw some clear drawer liner and picked it up to.

um2-micke-setup-sm.jpg?dl=0&raw=1 um2-micke-drawers-sm.jpg?dl=0&raw=1 um2-micke-back-sm.jpg?dl=0&raw=1

click for images for larger view

The width of the drawer liner was a perfect fit for the top of the MICKE unit, just needed a single cut along the left edge (as it was a longer roll). I didn't want my UM2 to accidentally slip off the top of this unit, hence the reason for this little purchase, plus it clear and looks good.

The bottom drawer can hold 10 Filament spools (approx 8" diameter x 2", same stuff I get from UM and Colorfabb). There is also a center caster to help support the weight of the bottom drawer, since it's meant to hold file folders. I have Loose Filament in the second drawer, and 2 small spools of Taulman filament in the third drawer. The Top drawer is where I keep my misc little tools I used (snips, long tweezers, tooth brush, etc). I wanted to get one of the drawer organizers from IKEA, that fits in the top drawer, but sometimes you just can't seem to find what you want in that place.

Also the depth of the smaller drawers aren't as deep as the larger bottom drawer, so you can't fit 2x Standard Spools in those, but you can fit a Standard Spool plus one of these Mini Spools just fine. Which would mean you can have a total of 13 Standard Spools + 3 Small Spools in this compact little setup, if you just wanted to store filament in the drawers.

Welp, that's it, I hope you like my compact little printer setup.

Edited by Guest
  • Like 2
Link to post
Share on other sites

Posted · UM2 + Ikea Drawer Unit = Compact Printing Station

Do you have the impression it is now louder on this drawer? Otherwise I find this a pretty nice fit.

 

Nope, seems about the same to me. Another thing I noticed, since those small drawers don't have the same depth as the larger bottom drawer, you could even mount the power supply in the inside the cabinet. Then just poke a hole at the top and bottom of the back for the power cords. There is about an extra 3" (depth) of empty space behind those drawers.

  • Link to post
    Share on other sites

    Posted · UM2 + Ikea Drawer Unit = Compact Printing Station

    oh yea, and if you do end up getting this and mount the power supply inside it, you will want to ensure it's mounted at the same level, or higher, then the 3rd drawer. Otherwise if you fill up the bottom drawer with 10 spools of filament, it will bump into the power supply unit, and you won't be able to close that bottom drawer all the way.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...