UM 2+ and FilaFlex

[foehnsturm 969]

Way better than expected.

Feeder pressure set to minimum, 0.8 mm nozzle, 0.2 mm layer, 15 mm/s, 225°C, no retraction, some drops of oil, no modifications to the feeder

Requires some patience but the 0.8 mm nozzle somehow compensates for the 15 mm/s.

Edited January 27, 2016 by Guest

[neotko 1,417]

I would love to see a working version of this, using the second extruder for flex/complex materials and maybe to have 1.75 at the same time on the second extruder hole.

Quote from other post:

 

I haven't had time to develop my version as much yet, but it works quite well so far.

Whoever claimed you can not use retraction when printing ninjaflex are wrong by the way:

 

[foehnsturm 969]

[Labern 774]

Sounds promising.

Looks like some items should print just fine.