The S3D profile might now be perfectly tuned for the UM2. I don't use S3D but there are many others here who do. Maybe they can chime in and provide some tips.
Organic models are hard to print. If you can, post an example.
The S3D profile might now be perfectly tuned for the UM2. I don't use S3D but there are many others here who do. Maybe they can chime in and provide some tips.
Organic models are hard to print. If you can, post an example.
Still reading this tboon? These are common problems and easy to fix but I fear you already returned your machine.
Recommended Posts
Nicolinux 288
Hi,
here are some things to check (if you haven't already):
As a last resort take a short video and put it on Youtube and share the link here. Start to record when the heated bed drives upwards at the beginning of a print and stop after the issue occurs (let it roll for a few more seconds in order to capture new sounds or other clues). Also film the feeder at the back of the printer when the issue occurs.
Link to post
Share on other sites