It can be a few thinks or none at all
https://ultimaker.com/en/community/11123-z-axis-layer-error?page=last#reply-129326
It can be a few thinks or none at all
https://ultimaker.com/en/community/11123-z-axis-layer-error?page=last#reply-129326
It's all down to the quality of the bearings, the pillars and their tolerances. Someone in the forum gave me some info on high quality Japanese parts and I started to realise the difference between 'ordinary' bits and the ultimate. We get what we pay for.
Recommended Posts
JohnFox 25
That looks like the dreaded Z sticking problem. I had this and eventually cleared it by cleaning the two Z axis pillars completely free of oil. My theory on this is: The two Z roller bearings are supposed to roll up and down the pillars. If there is oil on them, they try and slide, causing a minor jam as the balls lock up. Since I cleaned the pillars I have had zero faults like this, ( although this is tempting the fates .
Edited by GuestLink to post
Share on other sites