DidierKlein 729
Oui je suis pas très loin en effet, j'ai pas grand chose en stock parceque j'essaie de stocker un minimum mais j'ai quelques bobines de colorfabb et deux ou trois de Ultimaker.
Il te faut quoi?
salut didier
une bobine de pla 2.85mm couleur peu importe du moment que c est du bon filament. je travailles surtout ici avec du colorfabb mais tout autre marque que tu trouve bien est la bienvenue. le plus difficile c est de coordonne tout le monde. au maroc les bobines de filament coutent trois fois plus cher.
DidierKlein 729
il te la faut pour liège? ou pour le maroc?
pour liege j ai un membre de la delegation marocaine pour le francophonie qui va rentrer au maroc vendredi , donc ca serais super de pouvoir lui donner une bobine , il te p aye et moi je le rembourse a l arrivee au maroc. mais si tu a des gens qui viennent au maroc je les trouvent a leur arrive a l aeroport et je leur donne l argent.
Et une bobine dans la valise diplomatique, une !
J'adore 
!
bonsoir toutes et tous
je devrais pas rigoler mais c est regler, finalement ca viendra des etats unis, on n imagine pas ce que c est de faire de l impression 3D quand on vit en afrique. la moinde chose simple , logique en europe devient vite un cauchemar ici. merci encore a tout ceux qui ont aider.
bonne soiree
-
Our picks
-
UltiMaker Cura 5.3 stable released
ArunC posted a topic in UltiMaker Cura,
In this stable release, Cura 5.3 achieves yet another huge leap forward in 3D printing thanks to material interlocking! As well as introducing an expanded recommended print settings menu and lots of print quality improvements. Not to mention, a whole bunch of new printer profiles for non-UltiMaker printers!-
-
- 56 replies
.thumb.jpeg.0b7a05eafc09add17b8338efde5852e9.jpeg)
Picked By
MariMakes, -
-
Here it is. The new UltiMaker S7
MariMakes posted a topic in Official news,
The UltiMaker S7 is built on the success of the UltiMaker S5 and its design decisions were heavily based on feedback from customers.
So what’s new?
The obvious change is the S7’s height. It now includes an integrated Air Manager. This filters the exhaust air of every print and also improves build temperature stability. To further enclose the build chamber the S7 only has one magnetically latched door.
The build stack has also been completely redesigned. A PEI-coated flexible steel build plate makes a big difference to productivity. Not only do you not need tools to pop a printed part off. But we also don’t recommend using or adhesion structures for UltiMaker materials (except PC, because...it’s PC). Along with that, 4 pins and 25 magnets make it easy to replace the flex plate perfectly – even with one hand.
The re-engineered print head has an inductive sensor which reduces noise when probing the build plate. This effectively makes it much harder to not achieve a perfect first layer, improving overall print success. We also reversed the front fan direction (fewer plastic hairs, less maintenance), made the print core door magnets stronger, and add a sensor that helps avoid flooding.
The UltiMaker S7 also includes quality of life improvements:
Reliable bed tilt compensation (no more thumbscrews) 2.4 and 5 GHz Wi-Fi A 1080p camera (mounted higher for a better view) Compatibility with 280+ Marketplace materials Compatibility with S5 project files (no reslicing needed) And a whole lot more
Curious to see the S7 in action?
We’re hosting a free tech demo on February 7.
It will be live and you can ask any questions to our CTO, Miguel Calvo.
Register here for the Webinar-
-
- 18 replies
Picked By
MariMakes, -
-
.png.e7a3560300dbb24c6ece29a701a84b73.png)
Cura Alpha With New Tree Support 🎄
MariMakes posted a topic in UltiMaker Cura,
Are you a fan of tree support, but dislike the removal process and the amount of filament it uses? Then we would like to invite you to try this special release of UltiMaker Cura. Brought to you by our special community contributor @thomasrahm
We generated a special version of Cura 5.2 called 5.3.0 Alpha + Xmas. The only changes we introduced compared to UltiMaker Cura 5.2.1 are those which are needed for the new supports. So keep in mind, this is not a sneak peek for Cura 5.3 (there are some really cool new features coming up) but a spotlight release highlighting this new version of tree supports.-
-
- 30 replies
Picked By
MariMakes, -
-
.thumb.jpeg.0b7a05eafc09add17b8338efde5852e9.jpeg)
.png.e7a3560300dbb24c6ece29a701a84b73.png)
Recommended Posts
duriel 345
Tu as @DidierKlein qui n'est pas très loin je crois.
Link to post
Share on other sites