I would also recommend changing the PTFE coupler to a TFM or TFT coupler
-
1
Doesn't the UM2GO work with the new filaments?
Cool, Thanks. Will look into the upgrades. Do you know if at least TPU would work in the standard UM2GO?
Yes TPU will be fine to print with
-
1
-
Our picks
-
Introducing the UltiMaker Factor 4
ArunC posted a topic in UltiMaker 3D printers,
We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications-
-
- 3 replies
.thumb.jpeg.0b7a05eafc09add17b8338efde5852e9.jpeg)
Picked By
MariMakes, -
-
UltiMaker Cura 5.7 stable released
ArunC posted a topic in UltiMaker Cura,
Cura 5.7 is here and it brings a handy new workflow improvement when using Thingiverse and Cura together, as well as additional capabilities for Method series printers, and a powerful way of sharing print settings using new printer-agnostic project files! Read on to find out about all of these improvements and more.
-
-
- 26 replies
Picked By
MariMakes, -
-
.thumb.jpeg.0b7a05eafc09add17b8338efde5852e9.jpeg)
Recommended Posts
Dim3nsioneer 557
The UM2GO should be equipped with a TFM or TFT isolator for high temperatures and with a heated bed. An Olsson or Matchless block with a 35W heater is of advantage.
So a standard UM2GO is not well suited for Nylon and PC.
Edited by GuestLink to post
Share on other sites
Labern 774
The new filaments will have difficulties on the 2go due to the lack of heated bed.
You can get the heated bed kit from 3dsolex or one of their reseller's which will make printing with these materials more successful.
Link to post
Share on other sites