Jump to content

infill was working and now not dont know what did i change


daniho

Recommended Posts

Posted · infill was working and now not dont know what did i change

Can you share more info?

What software and version are you using?

What Printer?

What print settings?

It looks like you have concentric infill turned on maybe but not sure with the limited amount of information you have provided.

  • Link to post
    Share on other sites

    Posted · infill was working and now not dont know what did i change

    OK, I would suggest a few things. Why are you printing on a Raft? this is not normally needed especially for your item.

    Also it is very difficult to make a good quality print at 0.02mm layer height. Trust me I know. You would be better to print with 0.06mm layer height and it will come out looking better then you first picture.

    You have spiralize the outer contour turned on. Turn this off.

    Also 15mm/s print speed is very slow. Not sure what material you are using because you still didn't mention but it can easily over heat at that speed and such low layer height. You can reduce the temp really low but this will cause to much curling of the edges. I would suggest 30mm/s print speed

  • Link to post
    Share on other sites

    Posted · infill was working and now not dont know what did i change

    Maybe you originally had the layer height at 0.2mm not 0.02mm?

    Also like I said, 15mm/s print speed is very slow. This could be 30mm/s or 50mm/s

  • Link to post
    Share on other sites

    Posted · infill was working and now not dont know what did i change

    Also. Are you actually using a 0.25mm nozzle?

  • Link to post
    Share on other sites

    Posted · infill was working and now not dont know what did i change

     

    @daniho deleted the other topic to keep it here. Also please don't duplicate post if possible. Thanks!

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
      • UltiMaker Cura 5.7 stable released
        Cura 5.7 is here and it brings a handy new workflow improvement when using Thingiverse and Cura together, as well as additional capabilities for Method series printers, and a powerful way of sharing print settings using new printer-agnostic project files! Read on to find out about all of these improvements and more. 
         
          • Like
        • 26 replies
    ×
    ×
    • Create New...