Problem (imho) with STL loading in 2.4

[3dcase 37]

a question/complaint/remark whatever, but I don't like it :(.

I don't complain that often, but I guess this is something for HQ to look into.

Loading the same stl in 2.4 and 15.04.5 gives a difference. manually added supports are not shown nore printed in 2.4. What happened here?

In the meantime, I try to upload the stl somewhere...

https://www.youmagine.com/designs/stl-problem-in-cura-2-4

Inserted a youmagine link, notice the 3d view showing the supports

Regards Kees

Edited March 30, 2017 by Guest

[zoev89 73]

Hi Kees,

What is the wall thickness of the manually added support? Is it 0.4mm? In that case in Cura 1.5.4 changing the line width to 0.39 was good enough in 1.5.4 but in 2.4 it is not. In 2.4 you need to change the nozzle size to 0.38 to get walls of 0.4mm.

I regulary use objects with 0.4mm lines.

Regards,

Eric

[nallath 1,123]

Well, Cura already died for your sins; You don't have an active quality profile (as visible from not having a name in the profile dropdown) which means something already went horribly wrong.

[3dcase 37]

Hi Kees,

What is the wall thickness of the manually added support? Is it 0.4mm? In that case in Cura 1.5.4 changing the line width to 0.39 was good enough in 1.5.4 but in 2.4 it is not. In 2.4 you need to change the nozzle size to 0.38 to get walls of 0.4mm.

I regulary use objects with 0.4mm lines.

Regards,

Eric

 

I checked the Thickness it's 0.7mm so should be no problem.

The thickness problem could show after slicing, but until now never happened in solid view..

[3dcase 37]

Well, Cura already died for your sins; You don't have an active quality profile (as visible from not having a name in the profile dropdown)  which means something already went horribly wrong.

[/quote

:( That's a minor detail .

The values change with the profiles, My own profiles do show, the standard UM ones don't