Jump to content

CURA Infill overlap and skin overlap percentage is not present in the printing


Danielrug05

Recommended Posts

Posted · CURA Infill overlap and skin overlap percentage is not present in the printing

Hi,

I am trying to print with CURA 3.0.4 and this happened:

IMG_5265.thumb.JPG.f8b376132de608c2f0df0a62541eda3f.JPG

IMG_5266.thumb.JPG.bd562ee3033ac28e5e35802d9ecb8402.JPG

IMG_5267.thumb.JPG.aac36d6c6ca46cd82827aa54ea2f8032.JPG

In one of them you will see the same piece printed with CURA version 15.04.2 and the other with 3.0.4. When i tried to print FLEX, using the 3.0.4, the skin, inner wall and infill are separated from each other as you can see. The printed piece has numerous flaws compared to the one printed with the older software. what can i do to correct this? i have tried increasing the infill and skin overlap percentage up to 20% and the result is the same.

Thank you.

IMG_5265.thumb.JPG.f8b376132de608c2f0df0a62541eda3f.JPG

IMG_5266.thumb.JPG.bd562ee3033ac28e5e35802d9ecb8402.JPG

IMG_5267.thumb.JPG.aac36d6c6ca46cd82827aa54ea2f8032.JPG

  • Link to post
    Share on other sites

    • 5 weeks later...
    Posted · CURA Infill overlap and skin overlap percentage is not present in the printing

    I just stumbled upon this topic looking for solutions myself.

    Had the same problem with the update, this actually forced me to use older cura, now even on the older software I have noticed this issue and wanted to ask if by chance You found a way to correct this. I think it might be an under extrusion issue.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
      • UltiMaker Cura 5.7 stable released
        Cura 5.7 is here and it brings a handy new workflow improvement when using Thingiverse and Cura together, as well as additional capabilities for Method series printers, and a powerful way of sharing print settings using new printer-agnostic project files! Read on to find out about all of these improvements and more. 
         
          • Like
        • 26 replies
    ×
    ×
    • Create New...