Printing Ultimaker Robot on Ultimaker 2 +

[hcarroll 0]

I have tried to print the robot from the sd card three times. Looks great until halfway and then the nozzle gets caught on the robot and moves it out of position so fails to finish printing correction. First time it happened right after feet printed, second time a little further up and then third right when body finished printing. Please let me know what I am doing wrong!! Thanks

[stu_le_brew 42]

In principle it sounds like bed adhesion is your problem but to be able to offer any detailed help you need to post the settings you are using, also what materiel are you printing with

Edited December 8, 2017 by Guest