Save Tweak at Z Setup with Project?

[mike-truly 3]

Cura 3.1

 

If I have a project setup and I use Extensions>Post Processing>Modify G-Code and add a few TweakatZ setups as well... when I save the project and open it later... all the TweakatZ setups are gone.  As I need to adjust project settings for the print, all the TweakatZ setup has to be re-done again.  (It can be difficult to remember what I setup in the TweakatZ the first time and since the info is gone... that's no help).

 

Is there any way for Cura to save these TweakatZ setups with the project file?  Is there a way to save the TweakatZ setups separately?

 

Thanks!

 

Mike

 

[nallath 1,124]

Unfortunately not. We never got around to making that as it keeps dangling at the bottom of the priority list.

[mike-truly 3]

Bummer.  Thanks for the info though!

 

Mike

[ctbeke 133]

This is actually the 3rd of 4th time I hear about this in 2 days, so I'll discuss during the Cura team stand-up and see if we think it should be picked up.

[mike-truly 3]

Thanks for considering this!

 

It would be great if possible as in the old Cura, the previous TweakatZ settings were retained when Cura was started again.

 

Thanks again.

 

Mike