Jump to content

Selling my UM3


Recommended Posts

Posted · Selling my UM3
Hi Friends!!
I am selling for £2,700 a very lightly used Ultimaker 3  in totally excellent condition that has been basically used for 15 prints in total in ABS (mainly) and PLA! I want to buy the same but the extended so I am selling this one.
Printer is in the exotic Leicester UK. Can ship plus drive the UM3 in reasonable distance..
 
Look at the pictures and you will understand how nice and clean the 3D printer is. The printer has been kept covered to prevent dust as well (you can see cover in a picture). 
 
The only cosmetic issue is slight heat-induced discolouration on the rubber cover of the extruder, the one used for ABS (you can see in one picture) plus some glue marks on the glass plate, easily washable!! 
 
The 2 0.4mm AA cores are on at the moment and of course I have the BB core plus the other few bits.
 
Printer is excellent and all works fine. I have cleaned it up few times and have adjusted xy position twice, according to manual. I have ONLY used it with Ultimaker's own filament (black ABS and grey PLA) which is a good thing. I have currently unloaded the filament.
 
I am based in Leicester UK. Can ship to UK or elsewhere in EU for a cost but lets discuss if interested..
 
 

image13.jpeg

image9.jpeg

image10.jpeg

image11.jpeg

image7.jpeg

image6.jpeg

image5.jpeg

image3.jpeg

image2.jpeg

image1.jpeg

  • Link to post
    Share on other sites

    Posted · Selling my UM3

    Hi Mate, 

     

    Apologies I meant are you VAT registered? i.e can I claim the VAT back off this if I bought it? 

     

    Thanks, 

  • Link to post
    Share on other sites

    Posted · Selling my UM3
    49 minutes ago, Oj00 said:

    Hi Mate, 

     

    Apologies I meant are you VAT registered? i.e can I claim the VAT back off this if I bought it? 

     

    Thanks, 

    No my friend I am not a company :)

  • Link to post
    Share on other sites

    Posted · Selling my UM3

    Hi, mate 

    I lam a student in Manchester (UK) and quite interested in this printer. But I think the price is a little higher than my budget.

  • Link to post
    Share on other sites

    Posted · Selling my UM3

     

    31 minutes ago, xxsyen said:

    Hi, mate 

    I lam a student in Manchester (UK) and quite interested in this printer. But I think the price is a little higher than my budget.

    Hi there,

    I have messaged your profile directly!

  • Link to post
    Share on other sites

    Posted · Selling my UM3

    Hi

     

    Just wondering if this item is still for sale?

  • Link to post
    Share on other sites

    Posted · Selling my UM3

    Hi,

     

    Thanks for asking. It is still for sale?

  • Link to post
    Share on other sites

    Posted · Selling my UM3

    Different seller though?

  • Link to post
    Share on other sites

    Posted · Selling my UM3
    3 hours ago, WindyMiller said:

    Different seller though?

     

    3 hours ago, WindyMiller said:

    Different seller though?

    sorry, mistake

  • Link to post
    Share on other sites

    Posted · Selling my UM3

    Hi Guys, no the amazing UM3 has been sold!!

    Sorry this post needs to change

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
         
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
          • Like
        • 0 replies
      • Ultimaker Cura 5.6 stable released
        Cura now supports Method series printers!
         
        A year after the merger of Ultimaker and MakerBotQQ, we have unlocked the ability for users of our Method series printers to slice files using UltiMaker Cura. As of this release, users can find profiles for our Method and Method XL printers, as well as material profiles for ABS-R, ABS-CF, and RapidRinse. Meaning it’s now possible to use either Cura or the existing cloud-slicing software CloudPrint when printing with these printers or materials
        • 48 replies
    ×
    ×
    • Create New...