Throne of the Nautilus King Print

[kmanstudios 1,120]

OK, this took more than a month to get the PVA out of all the tiny areas deep in the model....why? Because it is a very thin shell to allow for LEDs to get in there and create a lamp with. There is even one spot that the PVA would just not come out..... ?  This is the raw print with no paints or anything.

 

I still have to add the lenses in the glasses and ceegar smoke as well as the other stuff. I have not even printed the base to complete the housing yet.

[Brulti 177]

On 5/22/2018 at 10:28 PM, kmanstudios said:

OK, this took more than a month to get the PVA out of all the tiny areas deep in the model....

 

A month he says... A month... *Bows in utter respect at the master of patience.*

[kmanstudios 1,120]

6 minutes ago, Brulti said:

 

A month he says... A month... *Bows in utter respect at the master of patience.*

Hahahahahahahaha...on some things......but not many ?

 

[Brulti 177]

On 3D printing obviously!

[kmanstudios 1,120]

Yeah, you hit a special interest of mine and I am really, really super patient :)