Machine control in Cura

[LePaul 331]

Maybe this is a wish list item...but maybe it's buried in there....

 

I was curious if there is a way to communicate with the printer, like a terminal window, jog commands, move bed up, down, manually control temps, etc in Cura ....or being developed?

 

Usually when I am doing things like a PID Autotune...or whenever I need to enter in commands, I wind up using Pronterface, S3D's machine window or via Octoprint's terminal tab.

 

Thanks!

 

Edited June 5, 2018 by LePaul

[Brulti 177]

You have Cura Connect, which allows you to do that and manage your whole network of printers if you have several of them. I don't personally use it, so I cannot tell you much about it.

[LePaul 331]

Thank you for your reply.

 

I haven't tried Cura Connect.  I had a friend asking about software to do these things like the machine control panel in S3D, Pronterface, etc....he doesn't have those but he does have Cura.  I didn't know if Cura might have something tucked away in the various versions...or maybe it's on the Coming Soon list?  It's very handy to send commands to your printer, etc.

 

[Brulti 177]

I've no idea. If Cura Connect does not do this, the best way to know if it's planned or to suggest is to head to the Cura's Github.

[LePaul 331]

Good idea. not savvy with how Github works but I will post something there.

[MarcosSf 1]

Agree with LePaul. People want to control it from Cura as we're doing it with Repetier Host, Pronterface or Simplify3D!

The new preheat and Gcode send tab it is really insufficient. We need a configurable movement jog (capable to invert directions), layer fan level, flow rate, speed, stop motors...

At least for me, its a must to leave others hosts/slicers.

[LePaul 331]

Well they shot it down quickly...which is really quite unfortunate.  

 

I hope others comment on this...because for other printers, it's very useful.  

 

Edited June 5, 2018 by LePaul