-
Our picks
-
Introducing the UltiMaker Factor 4
ArunC posted a topic in UltiMaker 3D printers,
We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications-
- 3 replies
.thumb.jpeg.0b7a05eafc09add17b8338efde5852e9.jpeg)
Picked By
MariMakes, -
-
UltiMaker Cura 5.7 stable released
ArunC posted a topic in UltiMaker Cura,
Cura 5.7 is here and it brings a handy new workflow improvement when using Thingiverse and Cura together, as well as additional capabilities for Method series printers, and a powerful way of sharing print settings using new printer-agnostic project files! Read on to find out about all of these improvements and more.
-
-
- 26 replies
Picked By
MariMakes, -
-
.thumb.jpeg.0b7a05eafc09add17b8338efde5852e9.jpeg)
Recommended Posts
tinkergnome 927
The firmware files for UM2+ and older Ultimaker printers are included in the Cura installer, there's no separate download page AFAIK.
If you have Cura installed, take a look at the installation folder ...../resources/firmware. At least that's the case for the Windows version, i don't know if it is the same location in the AppImage?
The firmware file for UM2+ is called "MarlinUltimaker2plus.hex"
If Cura is not installed, you can download the Windows setup file for Cura, open it with an unzip-tool and extract only the file(s) that you need.
Link to post
Share on other sites