Jump to content

Print Core erreicht nicht Temperatur


Lu1

Recommended Posts

Posted · Print Core erreicht nicht Temperatur

Hallo Community,

ich habe schon seit 1 1/2 Jahren einen Ultimaker 3. Ich drucke täglich und so habe ich schon einige Erfahrungen gesammelt.

Nun stehe ich aber vor einem großen Problem. Ich muss einen Auftrag mit 50 Stk drucken und bekomme immer nach einigen Stunden Druck die Fehlermeldung " Print Core auf Position 2 erreicht nicht die Temperatur". So bleibt er dann stehen und es geht nichts mehr. Erst nach ausschalten anschalten und Druck abbrechen kann ich wieder loslegen. Manchmal geht ein Druck durch aber meistens bricht er ab. Mal druckt er 5 Stunden und mal 20 Stunden.

Nun hoffe ich auf eure Hilfe.

Gruß Lu

 

  • Link to post
    Share on other sites

    Posted · Print Core erreicht nicht Temperatur

    Hi,

    also in erster Instanz würde ich mal einen anderen PrintCore testen, ich denke dann ist man schon etwas schlauer.
    So würde ich jedenfalls anfangen ..

  • Link to post
    Share on other sites

    Posted · Print Core erreicht nicht Temperatur

    Danke für eure Antworten. Die Silikonabdeckung sieht noch gut aus. Heute Nacht ist der Druck komplett fertig geworden. Der jetzige Druck sieht auch noch gut aus. Der PrintCore ist ein BB ich habe schon einen neuen bestellt. Mal schauen ob es daran liegt. Die Kontakte am PrintCore sehen gut aus. 

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Introducing Universal Cura Projects in the UltiMaker Cura 5.7 beta
        Strap in for the first Cura release of 2024! This 5.7 beta release brings new material profiles as well as cloud printing for Method series printers, and introduces a powerful new way of sharing print settings using printer-agnostic project files! Also, if you want to download the cute dinosaur card holder featured below, it was specially designed for this release and can be found on Thingiverse! 
          • Like
        • 10 replies
      • S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
         
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
          • Like
        • 0 replies
    ×
    ×
    • Create New...