-
Our picks
-
Introducing the UltiMaker Factor 4
ArunC posted a topic in UltiMaker 3D printers,
We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications-
-
- 3 replies
.thumb.jpeg.0b7a05eafc09add17b8338efde5852e9.jpeg)
Picked By
MariMakes, -
-
UltiMaker Cura 5.7 stable released
ArunC posted a topic in UltiMaker Cura,
Cura 5.7 is here and it brings a handy new workflow improvement when using Thingiverse and Cura together, as well as additional capabilities for Method series printers, and a powerful way of sharing print settings using new printer-agnostic project files! Read on to find out about all of these improvements and more.
-
-
- 26 replies
Picked By
MariMakes, -
-
.thumb.jpeg.0b7a05eafc09add17b8338efde5852e9.jpeg)
Recommended Posts
gr5 2,189
The top looks fine. Do you mean you have a problem with the side of the print?
You need to explain the problem better.
By the way you can't print this part in this orientation without support - those 2 overhangs will try to print over air and the filament will just droop down.
Did you create this model? Or did you download it? If you want to preserve those granite-like shapes and you want them on both sides then this will be a difficult print. If you want the side to be perfectly smooth then you can put the side you want to be smooth down and move the print downwards into the bed in cura.
If you want all sides to be smooth then you need to get a better CAD model.
Link to post
Share on other sites