Makergear M2 Centering

[peterbrown77 0]

Hola -

 

I'm trying to print a part that uses pretty much the entire buildplate on my M2, plus or minus a couple of mm.

 

The M2's origin as the lower left of the buildplate and the work volume is 200 x 250 x 200.

 

When it prints, it tries to print off the front of the buildplate and it stops at about 45mm from the back of the buildplate. I can manually move the nozzle over the entire build plate.

 

?

 

TIA

Edited May 29, 2019 by peterbrown77
Fixed