Cura Connect/App, Cannot View Off-Site

[brian_prefix 0]

I am running a S5 at my work. It is connected to our network via WiFi. When I asmof-site, I cannot access it through the Ultimaker app or through Cure Connect. Any thoughts?

[Smithy 1,144]

I haven't used the app for a while, but as far as I know it's not supported at the moment.

 

The only thing that currently works with the Cura cloud is that if you put the printer in the cloud, you can send print jobs from on the way. But only via Cura.

 

But the app should get more functions, at the moment the functionality is useless at least for me.

[ctbeke 133]

The Ultimaker App only supports monitoring via the local network. For remote monitoring I suggest you use Cura to send jobs and mycloud.ultimaker.com for remote monitoring (works great on mobile browser). Note that push notifications in the app do work outside of the local network (as we relay them through the cloud).

[Smithy 1,144]

25 minutes ago, ctbeke said:

Note that push notifications in the app do work outside of the local network (as we relay them through the cloud).

The problem with the push notifications is, that the important one is missing - material problem or out. I hope it will get somedays a higher priority.

[ctbeke 133]

9 hours ago, Smithy said:

The problem with the push notifications is, that the important one is missing - material problem or out. I hope it will get somedays a higher priority.

 

I have raised the filament flow sensor notifications internally last week. We'll see if this makes the priority list anytime soon.

[Smithy 1,144]

6 minutes ago, ctbeke said:

I have raised the filament flow sensor notifications internally last week. We'll see if this makes the priority list anytime soon.

 

👍 Thanks!