can't use print via usb

[james2722 0]

hello all

i'm using Ender3 with simplify3d and also cura .

before i compared printing quality simplify3d and cura and i found cura have more higher quality than simplify3d in my case so 

i really want to use cura.

i can connect usb via simplify3d but i difficult connect with Cura 4.3.0.

only what i can see is Save to File which save to sd card for print.

anyone tip or help much appreciate! thanks

Edited October 18, 2019 by james2722

[ahoeben 1,955]

You could save the file and use Printrun (pronterface) or OctoPrint to print the file.

[johnse 31]

Is there a small down-arrow next to the “print to file” button? Press the arrow and see if print to USB is an option.

[treereaver 2]

Make sure your printer is set to the correct com port in Machine settings menu.  If the com port is set to AUTO it doesn't work! (Mine needs to be set to COM 7)

[ahoeben 1,955]

1 hour ago, treereaver said:

Make sure your printer is set to the correct com port in Machine settings menu.

 

Ultimaker Cura versions 2.1 and up don't have a COM port selection in Machine Settings. The (very old by now) Cura 15.04 does have it. The Lulzbot Edition of Cura (Cura LE) also has it.