Yes, I'm set to Marlin.
I attach G-code, maybe it will help to locate my problem.
Does not download settings from Cura
So, the temperatures work, but the hotbed first heats up and then the hotend heats up.
Here it is written
https://community.ultimaker.com/topic/26391-start-heating-bed-and-extruder-and-level-bed-at-the-same-time/
I still have to find out why he is not pushing at 50 but at 100.
Edited by mclareniaktinkergnome 927
3 hours ago, mclareniak said:I still have to find out why he is not pushing at 50 but at 100.
Well, Marlin firmware let you change the printing speed (feed rate) as a percentage value.
That means, you are printing with 100% of 50mm/s (if the displays shows 100).
If you change it during a print, be aware that the feedrate percentage applies to all moves in all axes.
Now I understand. So it pushes at 50, but when I select 50 on the display, it actually pushes 25.
Thanks for the explanation.
Hello.
So I found out that in Cura I set the speeds as follows:
first layer 25mm / s and other 50mm / s.
But the printer prints everything at 25mm / s.
Can't you tell me where it's wrong?
Well thank you.
Recommended Posts
ahoeben 1,981
Which one have you set it to?
I'm fairly certain it should be "Marlin" for all Creality printers.
Link to post
Share on other sites