Jump to content

Newbie Help Filament unloading before print


Recommended Posts

Posted · Newbie Help Filament unloading before print

After slicing and loading a print on my Ender 3 pro, after the auto bed leveling takes place, the hot end moves to the left side of the bed and the extuder backs out the filament. Here is a snip of my starting gcode. I am really baffled, I can't seem to determine what could be causing this. Any help is greatly appreciated!

 

; Ender 3 Custom Start G-code

G28 ; Home all axes

G29 ; ABL

G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed

G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position

G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line

G1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little

G1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line

G92 E0 ; Reset Extruder

G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed

G1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish

  • Link to post
    Share on other sites

    Posted · Newbie Help Filament unloading before print

    I have no bed-leveling command in mine, instead of G29 command there is a G92 E0 command... G29 is put there for some reason, please explain!

     

    It has probably something to do with that I guess...

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
      • UltiMaker Cura 5.7 stable released
        Cura 5.7 is here and it brings a handy new workflow improvement when using Thingiverse and Cura together, as well as additional capabilities for Method series printers, and a powerful way of sharing print settings using new printer-agnostic project files! Read on to find out about all of these improvements and more. 
         
          • Like
        • 26 replies
    ×
    ×
    • Create New...