Problem scaling model

[BJohan 0]

 

Cura ver 4.5.0

 

Try to scale model with different figures for X Y and Z but changing Y or Z  makes the other change !!.

Snap and uniform scaling are off.

Example X= 88  Y =44  will set Z =44 also. Tries with changing Y and Z and the other one is also changing!!

Not what I want.

[Josnoww 15]

Hi BJohan,

 

I am not able to reproduce this issue. Could you save your project as a .3mf file and upload it?

 

Jos

[tiswi 0]

Hi Josnoww,

 

I can confirm the issue, with deactivated uniform scaling:

When I  adjust the Z percentage the X percentage changes.

When I adjust the X percentage the X mm AND the Z percentage changes too without changing the Z mm.

 

When I change the X mm value both the X and Z percentages change.

When I change the Z mm value only the X percentage changes.

 

The only values working correctly are the Y fields

 

I have this behaviour with every stl file.

entering the values in mm is the only way to get the settings right

[GregValiant 1,317]

What happens when you use one of the grips to pull the part?