Diagonal Stripes on 1st layer

[JoseAP 1]

Anyone know why I'm getting these. My prints used to be fine but now they're doing this.

[Guille_Fernande 0]

[gr5 edits] google translate:

Adjusts the beak with bed, when it is not the right height it prints transparent color.

 

[original post]

Ajusta el pico con cama, cuando no tiene altura adeciada imprime color trasnparente.

[gr5 2,224]

@Guille_Fernande - this part of the forum is english.

[gr5 2,224]

@JoseAP - I think you want the nozzle (beak?) just a little closer to the bed.  You can test this theory by pushing down a bit on the print head or up a bit on the bed while it prints the bottom layer.

[JoseAP 1]

Ok, I think it's the way cura is slicing. When I preview the layers there are diagonal gaps as well. 

[JoseAP 1]

Ok it's not just the first layer, it appears to be through the entire print. 

[JoseAP 1]

Through some trial and error (printed an old print that I knew was good) I realized that there must be something wrong with my printer (old print was lousy as well). I stretched my extruder spring. That helped, I also turn up the temp to 210 degrees. Seems to be printing a lot better now. Thanks for all the suggestions.