Looks like updating from Cura 4.6 to 4.7 broke the configuration file.
There is now a folder for each version with a CFG file that was automatically modified during the update.
C:\Users\%USERNAME%\AppData\Roaming\cura\4.6\machine_instances
C:\Users\%USERNAME%\AppData\Roaming\cura\4.7\machine_instances
You will once again need to add this line to [metadata]
machine_x3g_variant = r2
Here's my full config file, now located in the 4.7 directory:
[general]
version = 4
name = MakerBotReplicator #2
id = MakerBotReplicator #2
[metadata]
group_id = 1f4b7576-099e-4475-95d1-5f4e867ad293
setting_version = 15
machine_x3g_variant = r2
type = machine
[containers]
0 = MakerBotReplicator #2_user #2
1 = makerbotreplicator_current_profile
2 = empty_intent
3 = draft
4 = empty_material
5 = empty_variant
6 = MakerBotReplicator #2_settings #2
7 = makerbotreplicator
EDIT: Hmm, still having an issue printing. Will try making changes to the old 4.6 file as well.
If that doesn't work I'll re-install 4.6
Edited by mbr2_usr
Recommended Posts
Sioned 0
Just found the configuration file on Windows 10 PC
/Users/username/AppData/Roaming/cura/4.6/machine_instances/MakerbotReplicator2.global.cfg
Link to post
Share on other sites