"Modify settings for overlap" still generates redundant walls

[thanhtacles 1]

I used a support blocker cube to generate an overlap area for this example. Whenever you use an overlapping shape to influence a main object will always create extra walls wherever these overlaps occur. 

 

 

[nallath 1,123]

I've tried this on a nightly version of Cura and it does what you would expect it to do. See the attached image.

 

Could you share your project file? I can have a look to see what is going wrong.
 

[thanhtacles 1]

What format do you expect a project file to be in? Just the gcode?

[ahoeben 1,963]

A "project" is saved with File -> Save..., not with File -> Export...

Projects are saved as 3mf files, and include the model and settings. gcode files do not include the model, and only a subset of all settings.

[thanhtacles 1]

I think I may have found an easily replicatable way to reproduce this. If you rely on wall line counts rather than thickness (in mm) to increment your wall/skins, you need to specifically have those turned to 0 too. This is an easy fix in the cura code as youd just need to add an if in there.