stl positioning!

[mariocoppola 1]

Hi all,

I have a strange issue regarding the positioning of the stl in Cura: in Rhino the model is perfectly positioned in the area of the machine (it is a cilindrical volume machine with 200mm radius), but when I load it, Cura just change the positioning of the model and now it is impossibile printing it as it is outside the area... of course I checked the settings but as you can see everything seems to be ok.

 

Any suggests??

 

thanks!

Mario

[obewan 37]

why not just click on the model and drag it to where you want it.

 

[mariocoppola 1]

I tried but it says it is impossible slicing because of its dimensions!

[peggyb 171]

what are your settings in the 'build plate adhesion'?

skirt, brim?

do you have double extrusion?

[mariocoppola 1]

no settings there, I don't use any of them!

no, single extrusion

 

thanks

[peggyb 171]

can you make a screenshot of your build plate adhesion?

by default brim is active and can disturb the print size 

 

[mariocoppola 1]

here we go