Jump to content

No Power to S3


Recommended Posts

Posted · No Power to S3

Greetings. I started a print before going to bed and in the middle of the night my wife got up to dim the light on the printer. Apparently the print had stopped for some reason. In any case, I got up to take a look and there is no power to the printer at all. I turned it off and on and nothing. I unplugged and plugged and still nothing. I checked the outlet and it is live. The weird thing is that when I turn it on I can here a faint noise like a little click and a similar noise, very faint, but with more "twang" when I turn it off. No fan, no lights, no screen. It appears to be dead except that very faint click that can barely be heard when the power button is switched on or off. I've had the printer for about two weeks. Thanks for any help. -Charlie

 

 

  • Link to post
    Share on other sites

    • 1 year later...
    Posted · No Power to S3
    On 6/26/2020 at 6:27 AM, SamMcBride said:

    Greetings. I started a print before going to bed and in the middle of the night my wife got up to dim the light on the printer. Apparently the print had stopped for some reason. In any case, I got up to take a look and there is no power to the printer at all. I turned it off and on and nothing. I unplugged and plugged and still nothing. I checked the outlet and it is live. The weird thing is that when I turn it on I can here a faint noise like a little click and a similar noise, very faint, but with more "twang" when I turn it off. No fan, no lights, no screen. It appears to be dead except that very faint click that can barely be heard when the power button is switched on or off. I've had the printer for about two weeks. Thanks for any help. -Charlie

     

     

    Hi, did you get this fixed ? and if so how.. thanks

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.7 stable released
        Cura 5.7 is here and it brings a handy new workflow improvement when using Thingiverse and Cura together, as well as additional capabilities for Method series printers, and a powerful way of sharing print settings using new printer-agnostic project files! Read on to find out about all of these improvements and more. 
         
          • Like
        • 7 replies
      • S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
         
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
          • Like
        • 0 replies
    ×
    ×
    • Create New...