Atomic Filament, USA PETG PRO

[HillbillyHydrographics 1]

Hello all, Post 1.

Thought I would start here since I just completed my first print tonight with what seems like abnormal ease. I can only attribute  the success to either the printer or the filament but based on customer reviews I suspect it's the materials.

So here's the run down

Printer: AnyCubic Mega Zero, Fully stock, No heat bed, No Enclosure www.anycubic.com

Filament: Atomic Filaments, USA, Crystal Clear/Natural PETG PRO, $32.99, 1kg Roll,

   Recomended Settings: Nozzle Temp - 232 to 245C, Bed Temp - 60 to 70C,

File: OWL

Total Print Time 4.5hr

 

Actual Print Settings: Speed - 45mm, Nozzle Temp - 245C, Fan - 49% (125/255), Flow - 100 (defaut)

 

The results were nearly perfection after the first 5 minutes. I had a user error on my part which is what caused some minor curling on the initial adhesion layer but after that it was flawless.

[Smithy 1,146]

Nice result!

Maybe you should think about a heated bed in the future, I helps a lot when printing with other materials than PLA.

[HillbillyHydrographics 1]

Thank you. That's a definite upgrade comming in the near future, along with an enclosure. Though it hasn't been a issue with running PETG, yet. But for what I do, ABS will work and costs a fraction of the price. So far I have no complaints. With the filament or the printer.

[stroobandtpaul 0]

I have boght a feider machines FEIDER X-PRINTER .ANYONE HO HAS TROUBLES WHIT THIS PRINTER , AFTER 10 DAYS THE HEAT BED PCR IS ALREADY BROKEN ,  WHEN I AUTO LEVELING THE PRINTER THE BED DUSSEND HEAT SO I GET A "FATAL ERROR RESTART THE PRINTER " AT THE DISPLAY ;AND IT ISSEND SOLVED WHIT RESTARTING THE PRINTER .ANY SUGGESTIONS PLAESE, , IS THERE A PARAMETER TO CHANGE . HAS ANY ONE THE SOFTWHERE FOR THE PRINTER BORD , TO RE ISTYAAL THE PRINTER BORD . AND I CONNECTED THE PRINTER WHIT A USB C CABLE . BUTH A CANT PRINT DIRECTLY TO  THE PRINTER . EVERYTIME I MUST OPLOAD THE FIE ON THE SD CARD EKECT IT FROMM MY PC AND THEN PUT THE SD ARD IN THE PRINDER AND THEN A CAN PRINT . I CALLED FAIDER MACHINES . A THE D'ONT  GIVE A .... ABOUT MY ORE MY WARRENTY  ; I NOW ENGLISCH BUTH I AM  FROM BELGIUM . AND THERE ISSEND NOW WHERE A MANUAL IN DUTCH AVAILLEBEL . ORE DELEIVERD WHIT THE PRINTER NEDER IS THE BIG PLA ROL INCLUDES AS SHOWN ON THE BOX PLAESE HELP ME IM 62 AND TILLLEARNIG NEW THINGS THANKS

[Dustin 161]

On 11/24/2023 at 12:10 PM, stroobandtpaul said:

I have boght a feider machines FEIDER X-PRINTER .ANYONE HO HAS TROUBLES WHIT THIS PRINTER , AFTER 10 DAYS THE HEAT BED PCR IS ALREADY BROKEN ,  WHEN I AUTO LEVELING THE PRINTER THE BED DUSSEND HEAT SO I GET A "FATAL ERROR RESTART THE PRINTER " AT THE DISPLAY ;AND IT ISSEND SOLVED WHIT RESTARTING THE PRINTER .ANY SUGGESTIONS PLAESE, , IS THERE A PARAMETER TO CHANGE . HAS ANY ONE THE SOFTWHERE FOR THE PRINTER BORD , TO RE ISTYAAL THE PRINTER BORD . AND I CONNECTED THE PRINTER WHIT A USB C CABLE . BUTH A CANT PRINT DIRECTLY TO  THE PRINTER . EVERYTIME I MUST OPLOAD THE FIE ON THE SD CARD EKECT IT FROMM MY PC AND THEN PUT THE SD ARD IN THE PRINDER AND THEN A CAN PRINT . I CALLED FAIDER MACHINES . A THE D'ONT  GIVE A .... ABOUT MY ORE MY WARRENTY  ; I NOW ENGLISCH BUTH I AM  FROM BELGIUM . AND THERE ISSEND NOW WHERE A MANUAL IN DUTCH AVAILLEBEL . ORE DELEIVERD WHIT THE PRINTER NEDER IS THE BIG PLA ROL INCLUDES AS SHOWN ON THE BOX PLAESE HELP ME IM 62 AND TILLLEARNIG NEW THINGS THANKS

This thread is not at all the right place for this discussion.