Updated to 4.7, now says cofig is corrupt. Printer file problem

[DeanS 0]

I hesitantly upgraded to 4.7 and now have problems. When it starts it says the configuration is corrupt. There is a problem with my printer file I made in cura 4.6.

It's not in the resources folder. Does this mean everything I had set up is now gone? When installing I checked to keep my configurations.

Do I now have to start all over and make a new one. I finally had it set and working.

Frustrated!

 

[nallath 1,124]

1 hour ago, DeanS said:

I hesitantly upgraded to 4.7 and now have problems. When it starts it says the configuration is corrupt. There is a problem with my printer file I made in cura 4.6.

It's not in the resources folder. Does this mean everything I had set up is now gone? When installing I checked to keep my configurations.

Do I now have to start all over and make a new one. I finally had it set and working.

Frustrated!

 

No. The old files are still there. If you can zip the configuration folder, I can have a look at what is going wrong.

[DeanS 0]

I don't see any configuration folder.

[DeanS 0]

In the meantime I did have to make another json file to replace the missing one and it does work now. There is a file with the same name, no ext in the old 4.6  folder in the user/cura folder but it is not ascii. Cannot read it with notepad correctly.