Jump to content

Temperature drops


Robert_JK

Recommended Posts

Posted · Temperature drops

Hi all,

No one seems to be able to help with the questions I have regarding Cura and my 3D printer, so I turn to you, hopefully you guys can help out.

I'm using Cura as a slicer for my Creality CR-X dual extruder. Since Cura software supports this printer I though it would be ok to ask questions here.

Every time I'm slicing a model with dual extrusion mode on, the nozzle is dropping it's temp on de switch of materials for a few seconds. This gives a few issues so I would like to find a setting where it doesn't change the temp. I created costumes materials in Cura, got the setting for both extruders the same. So I thought I've done al there is able to do in Cura. Maybe someone can help. I've attached the Cura and gcode file. And also a screenshot of the gcode where you can see that the temp is dropping from 200 to 190 for a small periode.

Thanks in advance, Robert

Schermafbeelding 2020-09-14 om 08.36.53.png

RVS noord.gcode RVS noord.3mf

  • Link to post
    Share on other sites

    Posted · Temperature drops
    1 hour ago, Robert_JK said:

    Every time I'm slicing a model with dual extrusion mode on, the nozzle is dropping it's temp on de switch of materials for a few seconds.

     

    That's a printer with a single (mixing) nozzle, but two feeders, right?

     

    My best advise is to use the search function of the settings panel. Search for "temperature" (or "temp" or something like that).

    This will show you a list with all temperatures that are configured. There's proably a different initial, finishing or standby temperature set in the profile.

     

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...