changeAtZ change speed

[jumbo125 1]

Hello everybody

I have a question about the post-script changeAtZ.

There is the option, to change the"speed" (in percentage)

 

I'm going to change the speed for multiple layers....

 

Here is my question:

If I start with the basic setting of 25mm/s speed

 

changeAtZ: by Layer: 10; Speed: 50%;

I think the speed is 12.5mm/s now.....

 

10 layers later, I want to increase it to 60mm/s.

Do I have to calculate the percentages from the current speed(12.5mm/s)?

i.e. 12.5mm/s = 100% -----> 480% = 60mm/s

 

or does the script always calculate the default settings, i.e. 25mm/s ?????

If it not calculate with the current speed (12,5mm/s), rather it calculate by default settings like 25mm/s, so i  only need to increase it to 240%.

 

The Question:

 

changeAtZ: by Layer: 20; Speed: 480% or 240%;

 

Thank you for your help

[UlrichC-DE 109]

Hello

you can usually use this function manually on the printer.

Therefore in your case 25mm/s is always 100%.

I guess 240%

I did not try but this way it would be logical and understandable.