Jump to content

How to remove caked material from printer core


Recommended Posts

Posted (edited) · How to remove caked material from printer core

Somehow the material (Cards PLA-X3) I printed with did not attach to the build plate. Instead it became stuck between the silicon protection and the print core.

What is a safe way to remove this, without ruining the print core?

 

Edit: solved using this technique

IMG_20210323_170835.jpg

IMG_20210323_165016.jpg

IMG_20210323_170829.jpg

Edited by Niels_Amstel_Engineering
  • Link to post
    Share on other sites

    Posted · How to remove caked material from printer core

    Oh you were very lucky, there are nightmare-pictures around here where this completely killed both cores and flooded the complete printhead (looking at that beautiful CC-Core). 
    The most crucial thing is to get the part stuck down securely. I use almost always a brim (for small things that I can observe while they print usually not) and use mostly Dimafix glue. 

  • Link to post
    Share on other sites

    Posted (edited) · How to remove caked material from printer core

    If you have a heat gun with a narrow nozzle and can shield the print core frame so it doesn't warp, you can focus on the nozzle area and gradually work outward. 

     

    It looks from your photos as if you did not get much material on the heater or sensor cables.  That is a win.  If it is mostly on the heat block, slow and steady, you should manage to get everything off.

     

    John

    Edited by JohnInOttawa
    • Like 1
    • Thanks 1
    Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...