GregValiant 1,342
The second part shows a lot of under-extrusion. Since the lighter area isn't near as dense it shows as a lighter color.
I always ask myself "What's the last thing I did?". If it was that brass driver then check the set screw again.
There is also the ever popular "partial clog" in the nozzle to consider. Something interfered with the filament flow, and it started all at once.
Recommended Posts
mtclimber51 0
I have another problem with the print. It started okay but about 3/4 of the way, the print started to distort and was no longer uniform. Even the color is lighter. Any thoughts?
Link to post
Share on other sites