Printcore for Mowiflex 3D 2000 (PVOH)

[fmer 0]

Hello, I would like to know what is the correct printcore to use with Mowiflex 3D 2000 (PVOH) filament. I guess it should be BB, but I'm not 100% sure. Thanks in advance!

[gr5 2,071]

Yes.  Definitely use the BB 0.4.

 

Also, reading the instructions for this filament, I'd lower the temp from 215 to 210 which should automatically lower the initial layer temp from 220 to 215C.  Make sure you do this on the second tab (extruder 2).  Assuming you have this filament on the second core.

 

I'm not familiar with this brand of filament but I've heard really good things about aquasys

 

And make sure to keep this filament extremely dry.  Use about 1 cup of desiccant in a sealed bag and recharge the desiccant when it changes color (use color changing desiccant like this one:

https://www.amazon.com/gp/product/B01I5Y2DG6