different wall thickness

[mariuscapitanu 0]

Dears, 

 

would you please be so kind and help me with one topic, I have the box shown in the below pictures and after slicing the part I found a problem with a reduced wall thickness starting with the first line after the holes from the side walls. 

 

slicer version is 4.11.

 

there is no draft angle on the part and no difference in the wall thickness. 

 

with another slicer I have no longer this problem. 

 

thank you in advance, 

Marius 

 

[ylwperil 0]

I also have this issue, it always occurs on inside walls when creating a "Walled" object and also after a hole in that wall has been closed.

 

[ylwperil 0]

From one of the other posts, this behaviour seems to be linked to horizontal hole expansion. Try setting it to zero and see if slices properly.