Jump to content

when open any STL file just shutdown(cura.4.11)


kdnhsl0609

Recommended Posts

Posted · when open any STL file just shutdown(cura.4.11)

image.thumb.png.534147cf6d5fd049ab3dffbfdf86f63b.png 

 

Thread 0x00004210 (most recent call first):

File "C:\Program Files\Ultimaker Cura 4.11.0\plugins\USBPrinting\USBPrinterOutputDeviceManager.py", line 87 in _updateThread

File "threading.py", line 870 in run

File "threading.py", line 932 in _bootstrap_inner

File "threading.py", line 890 in _bootstrap

 

Thread 0x00007168 (most recent call first):

File "threading.py", line 306 in wait

File "zeroconf\__init__.py", line 2534 in wait

File "zeroconf\__init__.py", line 1715 in run

File "threading.py", line 932 in _bootstrap_inner

File "threading.py", line 890 in _bootstrap

 

Thread 0x000066c4 (most recent call first):

File "threading.py", line 306 in wait

File "threading.py", line 558 in wait

File "C:\Program Files\Ultimaker Cura 4.11.0\plugins\UM3NetworkPrinting\src\Network\ZeroConfClient.py", line 81 in _handleOnServiceChangedRequests

File "threading.py", line 870 in run

File "threading.py", line 932 in _bootstrap_inner

File "threading.py", line 890 in _bootstrap

 

Thread 0x00007254 (most recent call first):

File "zeroconf\__init__.py", line 1369 in run

File "threading.py", line 932 in _bootstrap_inner

File "threading.py", line 890 in _bootstrap

 

Thread 0x000076c4 (most recent call first):

File "C:\Program Files\Ultimaker Cura 4.11.0\plugins\RemovableDriveOutputDevice\RemovableDrivePlugin.py", line 61 in _updateThread

File "threading.py", line 870 in run

File "threading.py", line 932 in _bootstrap_inner

File "threading.py", line 890 in _bootstrap

 

Thread 0x00006c04 (most recent call first):

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\UM\Backend\Backend.py", line 165 in _storeStderrToLogThread

File "threading.py", line 870 in run

File "threading.py", line 932 in _bootstrap_inner

File "threading.py", line 890 in _bootstrap

 

Thread 0x00007b8c (most recent call first):

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\UM\Backend\Backend.py", line 153 in _storeOutputToLogThread

File "threading.py", line 870 in run

File "threading.py", line 932 in _bootstrap_inner

File "threading.py", line 890 in _bootstrap

 

Thread 0x00008204 (most recent call first):

File "threading.py", line 302 in wait

File "threading.py", line 433 in acquire

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\UM\JobQueue.py", line 98 in _nextJob

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\UM\JobQueue.py", line 124 in run

File "threading.py", line 932 in _bootstrap_inner

File "threading.py", line 890 in _bootstrap

 

Thread 0x000007e0 (most recent call first):

File "threading.py", line 302 in wait

File "threading.py", line 433 in acquire

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\UM\JobQueue.py", line 98 in _nextJob

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\UM\JobQueue.py", line 124 in run

File "threading.py", line 932 in _bootstrap_inner

File "threading.py", line 890 in _bootstrap

 

Thread 0x00008080 (most recent call first):

File "threading.py", line 302 in wait

File "threading.py", line 433 in acquire

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\UM\JobQueue.py", line 98 in _nextJob

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\UM\JobQueue.py", line 124 in run

File "threading.py", line 932 in _bootstrap_inner

File "threading.py", line 890 in _bootstrap

 

Thread 0x00007fb4 (most recent call first):

File "threading.py", line 302 in wait

File "threading.py", line 433 in acquire

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\UM\JobQueue.py", line 98 in _nextJob

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\UM\JobQueue.py", line 124 in run

File "threading.py", line 932 in _bootstrap_inner

File "threading.py", line 890 in _bootstrap

 

Thread 0x00003de8 (most recent call first):

File "threading.py", line 302 in wait

File "threading.py", line 433 in acquire

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\UM\JobQueue.py", line 98 in _nextJob

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\UM\JobQueue.py", line 124 in run

File "threading.py", line 932 in _bootstrap_inner

File "threading.py", line 890 in _bootstrap

 

Thread 0x000042b8 (most recent call first):

File "threading.py", line 302 in wait

File "threading.py", line 433 in acquire

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\UM\JobQueue.py", line 98 in _nextJob

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\UM\JobQueue.py", line 124 in run

File "threading.py", line 932 in _bootstrap_inner

File "threading.py", line 890 in _bootstrap

 

Thread 0x00008034 (most recent call first):

File "threading.py", line 302 in wait

File "threading.py", line 433 in acquire

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\UM\JobQueue.py", line 98 in _nextJob

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\UM\JobQueue.py", line 124 in run

File "threading.py", line 932 in _bootstrap_inner

File "threading.py", line 890 in _bootstrap

 

Thread 0x00005794 (most recent call first):

File "threading.py", line 302 in wait

File "threading.py", line 433 in acquire

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\UM\JobQueue.py", line 98 in _nextJob

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\UM\JobQueue.py", line 124 in run

File "threading.py", line 932 in _bootstrap_inner

File "threading.py", line 890 in _bootstrap

 

Thread 0x00005ce8 (most recent call first):

File "threading.py", line 302 in wait

File "threading.py", line 433 in acquire

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\UM\JobQueue.py", line 98 in _nextJob

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\UM\JobQueue.py", line 124 in run

File "threading.py", line 932 in _bootstrap_inner

File "threading.py", line 890 in _bootstrap

 

Thread 0x00006bac (most recent call first):

File "threading.py", line 302 in wait

File "threading.py", line 433 in acquire

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\UM\JobQueue.py", line 98 in _nextJob

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\UM\JobQueue.py", line 124 in run

File "threading.py", line 932 in _bootstrap_inner

File "threading.py", line 890 in _bootstrap

 

Thread 0x00007f60 (most recent call first):

File "threading.py", line 302 in wait

File "threading.py", line 433 in acquire

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\UM\JobQueue.py", line 98 in _nextJob

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\UM\JobQueue.py", line 124 in run

File "threading.py", line 932 in _bootstrap_inner

File "threading.py", line 890 in _bootstrap

 

Thread 0x0000336c (most recent call first):

File "threading.py", line 302 in wait

File "threading.py", line 433 in acquire

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\UM\JobQueue.py", line 98 in _nextJob

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\UM\JobQueue.py", line 124 in run

File "threading.py", line 932 in _bootstrap_inner

File "threading.py", line 890 in _bootstrap

 

Thread 0x00007664 (most recent call first):

File "threading.py", line 302 in wait

File "threading.py", line 433 in acquire

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\UM\JobQueue.py", line 98 in _nextJob

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\UM\JobQueue.py", line 124 in run

File "threading.py", line 932 in _bootstrap_inner

File "threading.py", line 890 in _bootstrap

 

Thread 0x000061b0 (most recent call first):

File "threading.py", line 302 in wait

File "threading.py", line 433 in acquire

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\UM\JobQueue.py", line 98 in _nextJob

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\UM\JobQueue.py", line 124 in run

File "threading.py", line 932 in _bootstrap_inner

File "threading.py", line 890 in _bootstrap

 

Thread 0x00004014 (most recent call first):

File "threading.py", line 302 in wait

File "threading.py", line 433 in acquire

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\UM\JobQueue.py", line 98 in _nextJob

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\UM\JobQueue.py", line 124 in run

File "threading.py", line 932 in _bootstrap_inner

File "threading.py", line 890 in _bootstrap

 

Thread 0x00004af0 (most recent call first):

File "threading.py", line 302 in wait

File "threading.py", line 433 in acquire

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\UM\JobQueue.py", line 98 in _nextJob

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\UM\JobQueue.py", line 124 in run

File "threading.py", line 932 in _bootstrap_inner

File "threading.py", line 890 in _bootstrap

 

Current thread 0x000041bc (most recent call first):

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\cura\CrashHandler.py", line 396 in _logInfoWidget

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\cura\CrashHandler.py", line 182 in _createDialog

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\cura\CrashHandler.py", line 86 in __init__

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\bin\cura_app.py", line 159 in exceptHook

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\UM\Math\Polygon.py", line 249 in getConvexHull

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\UM\Math\Polygon.py", line 170 in intersectionConvexHulls

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\cura\Arranging\Nest2DArrange.py", line 77 in findNodePlacement

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\cura\Arranging\Nest2DArrange.py", line 126 in arrange

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\cura\CuraApplication.py", line 1937 in _readMeshFinished

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\UM\Signal.py", line 332 in __performEmit

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\UM\Event.py", line 218 in call

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\UM\Qt\QtApplication.py", line 479 in event

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\cura\CuraApplication.py", line 1090 in event

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\UM\Qt\QtApplication.py", line 393 in exec_

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\lib\python3.8\site-packages\cura\CuraApplication.py", line 867 in run

File "C:\Users\ultimaker\AppData\Local\Temp\cura-build-4.11-exe\build\inst\bin\cura_app.py", line 233 in <module>

File "Console.py", line 36 in run

File "__startup__.py", line 74 in run

 

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.7 stable released
        Cura 5.7 is here and it brings a handy new workflow improvement when using Thingiverse and Cura together, as well as additional capabilities for Method series printers, and a powerful way of sharing print settings using new printer-agnostic project files! Read on to find out about all of these improvements and more. 
         
          • Like
        • 7 replies
      • S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
         
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
          • Like
        • 0 replies
    ×
    ×
    • Create New...