Jump to content

Klipper PAM Cura Start Code


Recommended Posts

Posted · Klipper PAM Cura Start Code
Hi,

i wanted to run the Klipper PAM Plugin cause im annoyed of waiting for long Time bed leveling.
For the Plugin there are two Start Code.
One for SuperSlicer/PrusaSlicer:
MESH_CONFIG X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}
And one for Ideamaker:
MESH_CONFIG X0={print_pos_min_x} Y0={print_pos_min_y} X1={print_pos_max_x} Y1={print_pos_max_y}
Somebody know in which way i have to edit it to make it work on Cura ?
Or where the documentation about this can be found ?
  • Link to post
    Share on other sites

    Posted · Klipper PAM Cura Start Code

    Cura contributor @ahoeben put The Replacement Patterns list together. I don't see Max's and Min's for the build plate footprint of the actual print.  They do show up in a gcode file.  Maybe there is a way to extract the info with your plugin?

     

    This is from the beginning of a Cura gcode file...

    ;MINX:51
    ;MINY:51
    ;MINZ:0.2
    ;MAXX:179
    ;MAXY:179
    ;MAXZ:60.112

     

    IF the keywords exist then you would end up with something like this in your StartUp Gcode:

    MESH_CONFIG X0={MINX} Y0={MINY} X1={MAXX} Y1={MAXY}

    Using the example numbers from above that would result in...

    MESH_CONFIG X0=51 Y0=51 X1=179 Y1=179 in the actual Gcode file.

  • Link to post
    Share on other sites

    Posted · Klipper PAM Cura Start Code

    These keywords do not exist as replacement patterns. A postprocessing plugin script could be used to find the data in the gcode and insert that MESH_CONFIG macro from it.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...